How Do You Clean and Detail A Bike?

Bike polishing
Spread the love

A bike maintenance routine may seem simple to any novice owner- washing and drying the vehicle. However, your approach to the job can effectively influence the task at hand. Therefore, you must clean and detail a bike correctly to avoid harming its paint and, worst – rust.

If you have previously worked on detailing a car or a truck, you may know that washing the exterior with efficient tyre cleaners is enough to regain its shine. However, the scenario is somewhat different regarding two-wheelers because cleaning is a more intricate process here. You may ideally necessitate concentrating on various corners, creases, and cables when detailing a bike. 

The experts have discussed the fundamentals of bike maintenance at home. Follow the post to achieve a complete bike wash without spending a financial bomb. 

  • Washing A Motorbike

According to experts, you must always have a detailed understanding of bike maintenance at home to avoid resource and time wastage. You must ideally clean and detail a bike consistently to eliminate corrosive materials. Moreover, it allows you to evaluate the bike for any structural or operational issues.

  • Bike Washing Zone

You may ideally begin by finding a suitable location for your bike maintenance. This is an elementary yet frequently overlooked tip when discussing bike maintenance. You may look for a tiled or cemented flooring surface for your bike. This will eliminate the probability of a mud bath for your two-wheeler. Moreover, it would be best to have proper drainage around the place when you begin the process. 

  • Appropriate Cloth

You may also bring microfiber towels or clean clothes to clean and detail a bike. The industry experts recommend having at least four towels by your side. You could use two for the tank and the remaining for other mechanical pieces. 

Using clean and soft towels lets you detail the vehicle without leaving any swirl and scratch marks behind. You may increase the number of clothes if oily components require rinsing.

  • Suitable Water Pressure

If you have a water jet spray available at home, set it to a minimal water pressure before you spray on the bike surface. Ideally, it would be best, to begin with passive water spray over the electrical and mechanical components. Once you have poured it all over the exterior surface, you may crank the water pressure and directly contact the parts. 

If you have an older bike model, you will need the water pressure to be at its lowest setting and avoid pressure washing altogether. You may choose to substitute it with a damp cloth instead. 

  • Keep The Petrol in The Tank

It would be best to refrain from using detergents to clean and detail a bike. This is because they are best suited for cleaning cutlery and not vehicles. Moreover, they contain harmful chemicals that could directly damage the paint on your bike. 

In India, most people choose fuel like diesel to clean their two-wheelers. While it’s a compelling choice, it can also permanently destroy the paint. Therefore, your suitable go-to should be car shampoos.

  • The Complete Job

You must concentrate intensely on finding the devil that is in the details. This will ideally allow you to clean and detail a bike effectively. Your bike deserves and requires a thorough cleaning- with every area getting attention. 

You could bank on a toothbrush to reach the nooks and corners between the engine and the fuel system. You may also find it quite a challenge to clean the wheels of an older motorcycle. However, having a little patience will help you see off the project.

  • Rinse and Rub

Finally, it’s time for you to pick up a clean cloth to dry your vehicle’s bodywork. You must start with the exterior surface and slowly transition to other components. As previously acknowledged by the experts, you may want to use separate clothes to clean the mechanicals and bodywork. 

Once you have completed the step, take your bike out for a spin. This will help the bike to dry off against the oncoming air- especially the nooks mentioned above, and crevices will benefit from this. You may see things off by putting a thin coat of Vaseline on chrome pieces for ultimate protection. 

Conclusion

As you may expect, there are numerous approaches people take while cleaning their motorcycles. There are endless amounts of further ideas on the subject, with tips and tricks picked up via diverse experiences.

Although maintaining a motorcycle can be labour-intensive, Carorbis makes getting your bike back to its freshly purchased shine simple. Visit the homepage right now to see the entire selection of Carorbis maintenance and cleaning goods. You can trust their professionals to clean and detail a bike effectively.

Also read Car Seat Organizers Can Be Your Best Friend While Driving

Leave a Reply

Your email address will not be published. Required fields are marked *